background image

 9 of 15 

TC-800 | TC-1100 Radar Speed Sign Installation Manual MN0035 v23.02 

 

 

Mounting the Solar Panel to the Pole 

Best Practices for Installation of Solar Panels 

The solar panel should be positioned facing as close to south as  
possible 

at a 45° angle.

• 

The solar panel should be washed with a mild dish detergent and 
soft cloth every 6 months for optimal performance

 

 

Small Solar Panel Mounting Bracket  
For use with 50 watt panels 

 

Attach the solar panel to the long tapered piece of the mounting 
bracket (screws, nuts, and washers are included). The holes on 
the solar panel and mounting bracket are pre-drilled. 

Attach the short mounting bracket to the 

has pre-drilled slots for two different orientations depending on the type 

of pole that is used.  

has pre-drilled slots for two  

different orientations depending on the type of pole that is used. For mounting on a pole or round surface, 

Secure the mounting bracket with the solar panel to the pole using banding clamps. Radarsign provides two  
banding clamps that fit 3½” - 4½” diameter poles. For larger or smaller poles, customer must provide clamps. 

Mount the bracket to the pole at the desired position with the solar panel facing as close to south as possible to a 
45° angle and secure to pole.

Tighten all nuts on the mounting bracket and solar panel

Solar panel at 45° 
angle facing south 

Op

e

n

 s

id

e

 

Banding straps for 

securing to pole 

Open side of short bracket facing towards the pole 

Flat side 

Flat side of short bracket facing away from the pole 

Position so top holes are farthest from the pole 

P

o

le

 

Summary of Contents for TC-800
















Reviews: