Page 5 from
24
Instructions rad3_bullitt_kids_box_2022 09
12
1.
To protect your bike and reduce noise, you should enclose e.g. strips of an old bicycle inner
tube between the panels and the frame. Of course, you can also use professional (thick) paint
protection film or insulation foam strips.
If you buy your Bullitt from us, we can use partition tape B1 from Würth ®.
Fig. 1-1:
Protective supplement
Paint protection, noise
reduction
Fig. 1-2:
with Würth tape
(glued on the
underside!)
2.
If necessary, fit the belts as described in point 9 now - it is easier.
Place the bottom panel from front to back on the base frame, taking care if necessary t h a t
the inserts do not slip. Align the plate so that the distances to the frame are even on the right and
left.
Fig. 2:
Insert base plate, screw
points