Page 23 from
24
Instructions rad3_bullitt_kids_box_2022 09
12
15. Other accessories
You can fit Ortlieb outer bags to your Kids Box. These are available in sizes S and L.
Use the enclosed templates and pre-drill accordingly. In the front or rear wall with 9 mm panels
you can use the original screws, otherwise shorter ones, e.g. pan head screws 3.9 x 9.5 mm.
In our suggestion, use the pockets on the back of the box facing the rider. For the eBullitt with
battery, only size S makes sense to use, otherwise size L fits and fills the space in the frame
completely (but also works for eBullitt).
Fig. 15-1:
Ortlieb outer bags in
comparison:
left S // right L (small
picture L)
Despite the Kids Box, you can use the driver bag panel - with minor restrictions in usability.
The use of a so-called Maxci-Cosi adapter (e.g. from Bakfiets.nl) is possible. Correct installation
and use is your responsibility. rad3 accepts no liability.
When mounting, we
STRONGLY
recommend the use of large K-discs on the opposite side!
Due to the space available, only the MaxiCosi and 1 child will fit in the box. There is not enough
space for a second child.
With a little skill, so-called Weber trays / Steco trays can also be used. We are working on offering
a better prepared solution here.
Fig. 15-2:
Size example ONLY, no
assembly recommendation
