Assemble platform
Lay the three wire
platforms on the floor.
Place the wire platform with
the four tabs in the middle.
These tabs will fit into the two
outer platforms.
1
F
Lay the platform
supports underneath and
across all three wire
platforms. The holes on the
platform supports should face
towards the outside edge of
the wire platforms.
2
M
Locate the holes on platform
supports for J-bolts and slide four
J-bolts thru the wire platforms and holes
on the four corners of platform supports.
Place J-bolt between double wire. The
J-bolt should hook over wire platform
and over the outside edge of the
platform support. Using a nut,
hand-tighten only.
3
S
Place the remaining
J-bolts over the edge of
the wire platforms and over
the outside edge of the
platform supports. Using a
nut, hand-tighten only.
4
S
