Attach cable assembly
to platform
2
1
(Large adjustment)
(Small adjustment)
Thread one nut
half-way up the eye-bolt at
the end of the Cable
assemblies . Insert
eye-bolt through the hole
at the end of Shelf support
and fasten washer and nut
from underneath. Repeat
on all four corners.
14
A
M
If platform is not
level, adjust by
pulling the cable
through the nylon
cable ring. For small
adjustments, move
both nuts up or
down. When leveled,
tighten the nuts on
the Cable assembly
and tighten
J-bolts on the
platform with a
wrench.
15
A
S
Route the ends of Cable
assemblies through the
arms and over the pulleys.
13
A
B
