Definition of the enabled range of the mask length of the processed routing rule.
Filter protocol
List box {Off; Match; Not match}, default = "Off"
Selects the way how the routing rule source protocol is compared.
Protocol
List box {System; OSPF}, default = "System"
Selection of the protocol origin. "System" – stands for rules from the ordinary routing table. "OSPF"
stands for rules from the OSPF protocol.
Filter OSPF source
List box {Off; Match; Not match}, default = "Off"
Selects the OSPF routing rule source comparison mode.
OSPF source
List box {Internal; Inter-area; External type 1; External type 2}, default = "External type 2"
OSPF sources. "Internal" – stands for internally generated rule (e.g. interface range). "Inter-area"
– stands for rule generated on the area borders.
Filter OSPF tag
List box {Off; Match; Not match}, default = "Off"
Selects the way of filtering based on OSPF tag.
OSPF tag
Number {0 – 2
32
-1}, default = 0
OSPF tag to be compared. The tag is added to a rule when inserted to OSPF.
Action
List box {Accept; Reject; Pass}, default = "Accept"Defines what action is taken on the routing rule.
"Pass" continues in processing.
7.2.4.7. Import OUT rules
Import OUT filter [PP1] rules. The order of rules matters. Maximum number of filter rules is 256.
Filter policy
List box {Accept; Reject}, default = "Accept"
Defines what action is taken on the routing rules which were not captured (i.e. fallback) in the
Import
OUT filter
.
Filter limit
Number {1 – 65535}, default = 1024
Limit of the accepted routing rules from the neighbor. The limit applies before this Import OUT filter.
Excess rules are dropped.
Active
List box {On; Off}, default = "On"
Enables / disables the filter rule.
Note
Informational note.
M!DGE3 Cellular Router – © RACOM s.r.o.
98
Settings
