Note
You may add a note to each address with your comments (UTF8 is supported) for your
convenience.
7.1.2.3. Individual protocol parameters
Some of the SCADA protocols are able to setup additional Slave device response behaviour.
Response target mode
List box {LASTRCV; TARGET}, default = "LASTRCV"
Response for the incoming frame shall be directed to the IP address of the Master who sent the
frame (LASTRCV) or to a specified IP address (TARGET).
Response target IP
IP address to which the response is sent when TARGET is chosen in the Response target mode.
7.1.2.3.1. None
The None protocol switches the COM port off. All incoming data will be thrown away, No data will be
send into the COM interface.
7.1.2.3.2. Transparent protocol
Operates in Bridge mode only. All the traffic is bridged transparently to M!DGE3 network (see
???
for
details).
7.1.2.3.3. Async link
Async link creates an asynchronous link between two COM ports on different M!DGE3 units. Received
frames from COM port or from a Terminal server are sent without any processing transparently to Radio
M!DGE3 Cellular Router – © RACOM s.r.o.
50
Settings
