Paradigm Installer/User Guide
24
From the OSD menu.
1.
From the main OSD Window, press the
Control
key twice or type
Alt-M
to access the Command Menu.
2.
Select ‘Turn scanning ON’ or ‘Turn scanning OFF’ from the menu.
This is a toggle option - only one scanning option will show on the
menu at any one time.
3.
Press
Enter
.
By keyboard hot-key sequence (System Administrator or
non-secure mode only)
The following key sequences control scanning.
1. From the main OSD Window, press the
Control
key twice or type
Alt-M
to access the Command Menu.
2. Choose ‘Scanning order’ from the menu.
3. Select either ‘Sequential order’ or ‘Alphanumeric order’.
4. Press
Enter
.
Setting the
Scanning Order
Turning Scanning
On and Off
Key Sequence
Action
<CM>
SG
<Enter>
Enables the scan Go command.
<CM>
SH
<Enter>
Enables the scan Halt command.
