Paradigm Installer/User Guide
Connecting Computers to the Paradigm
4. Locate your first computer interface cable. It will have a 25-pin “D”
connector at one end. Plug this cable into any lettered channel port on
the rear of the Paradigm. The other end of the input cable will have
five connectors: a 15-pin “HDD” connector for your video, a 5-pin DIN/
6-pin miniDIN connector for an AT or PS/2 keyboard connection, and
a 9-pin serial/6-pin miniDIN connector for a serial or PS/2 mouse
connection. The PS/2 mouse connector is designated by a yellow band
or mouse icon.
Use only the keyboard and mouse connectors that are ap-
propriate for your PC, and leave the others unconnected.
Plug these connectors into the matching ports on your computer.
5. Locate your next computer interface cable. Repeat step 4 until all
computers are properly attached to the Paradigm.
POWER
100
-24
0V
~, .1
a, 5
0/8
0H
z
M
AD
E IN
U
SA
G
H
E
F
C
D
A
B
PA
TE
NT
P
EN
DIN
G
T 2A, 250 V
AC
US
ER
6
MOUSE PORT
VIDEO
PORT
KEYBOARD
PORT
