操控說明
OPERATION GUIDE
符號說明 :
Description for Special Figures Used In This Manual :
數值閃爍時,表示可修改.
Value can be adjusted when it is flashing.
表示自動換段.
Auto Sections Change by Stitch Counter-SY.
900
連續按兩下段數之數字鍵 , 可以刪除多餘的段數.
Push the section button twice to erase the extra sections.
操作說明:
Operation Guide:
切刀後,前往下段工程.
Countinue to next Section after Cut.
自動切刀後,前往下段工程.
Countinue to next section after Auto Cut.
如需設定第一段之自動換段針數, 按下＂1＂號鍵後按壓“針數設定＂鍵,進入針數設定, 以+ - 鍵來調整針數.
Press Section 1 key and then press Stitch Set button. You can adjust the stitch for Auto section change by press + - key.
操作說明:
Operation Guide:
連續按兩下針數設定鍵 , 可以解除自動換段功能.
Press the Stitch Set button twice to disable Auto function.
操作說明:
Operation Guide:
3
3
13
NO.MCA20K-02