操控說明
OPERATION GUIDE
11
NO.MCA20K-02
功能:
FUNCTION:
01. 進帶長度 (00= 35mm 每增加1=1mm, 99=134mm)
Length of Inserting Tape (000=0mm, Every 1 unit=1mm, 99=134mm)
01 INSER TAPE LENGTH
20
02 INSER TAPE SPEED
50
09 FEED TAPE AFTER CUT
00
09. 切刀後送帶長度
(00= 0mm 每增加1=0.35mm, 99=34mm)
Feed Tape after Cut
(00=0mm, Every 1 unit=0.35mm, 99=34mm)
02. 進帶速度
(00=50mm/秒 每增加1=1.9mm/秒. 99=238.1mm/秒)
Speed of Inserting Tape
(00=50mm/Sec., Every 1 unit=1.9mm/Sec., 99=238.1mm/Sec.)
08 START TENSION STITCH
03
08. 開始送帶針數 (00=0 針 每增加1=1針, 99=99針)
Stitch for Start Feed Tape (00=0 stitch, Every 1 unit=1 stitch, 99=99 stitch)
10 TAPE ENDING TENSION
OFF
10. 切刀後張力控制器 (RTA專用)
(OFF=關, 01=1針 每增加1=1針, 99=99針)
Ending Tape tesnion after Cut (For RTA device Only)
(OFF= No function, 01=1stitch, Every 1 unit=1stitch, 99=99stitch)
03 INSER TAPE TENSION
00
03. 始縫時鬆緊帶回拉 (00=0mm 每增加1=0.35mm, 99=34mm)
Pull back tape at beginning sewing
(00=0mm, Every 1 unit=0.35mm, 99 = 34mm)
04 CUTTER TIMER
30
04. 切刀吻合時間 (000= 0.01秒 每增加1=0.01秒, 99=1秒)
Cutter Timer (00=0.01Sec. Every 1 unit=0.01Sec. 99=1Sec.)
05 END V-ON STITCH
15
05. 切刀後,車縫針數. TR與真空吸風裝置會啟動 (TR專用)
(00=0針 每增加1=1針, 99=99針)
Stitch after Cut to Active TR and Vacuum device (For TR deviceOnly)
(00=0 stitch, Every 1 unit=1 stitch, 99=99 stitch)
06 AUTO FOOT UP
OFF
06. ON:車縫完成停止後押腳自動提昇進帶
ON: Pressure Foot lifted up and Insert the Tape after completely operation.
07 START V-OFF STITCH
10
07. 始縫時,真空吸風裝置動作針數 (TR專用)
(00= 0針 每增加1=1針, 99=99針, ON=連續吸風)
Vacuum Actives stitch at beginning sewing ( For TR device Only)
(00=0 stitch, Every 1 unit=1 stitch, 99=99 stitch, ON=Non-stop)
11 CUTTER DELAY TIMER
FOR RTA 10
11. 切刀延遲時間 (RTA專用)
( 00=0秒 每增加1=0.005秒, 99=0.5秒)
Cutter Delay Timer Cut (For RTA device Only)
(00=0 Sec. Every 1 unit=0.005 Sec. 99=0.5 Sec.)
