race result AG
Joseph-von-Fraunhofer-Straße 11, 76327 Pfinztal
Germany
+49 (721) 961 409 01
If 2 or more transponders of the same code are detected then "
Number
x 2" will be
displayed.
If 2 or more transponders with different codes are detected then "multiple tags" will
be displayed.
Firmware Update
The current version is always shown in the top left screen corner.
How to Update
When running firmware is 0.9.9 or newer, the stick with the update must be inserted
prior to boot and the machine will ask you whether to update or not. After installing
the update, your Chip2Go will reboot and ask you again whether to update or not.
Unplug the USB drive now, then abort the message. You may be asked to install 2
further updates, which you can't abort. After installing these updates, your Chip2Go is
updated and can be used again.
Note: there must not be more than one firmware file on the USB drive. Also, make
sure your drive is formatted as either NTFS or FAT.
