background image

 

race result AG  

 

 

Joseph-von-Fraunhofer-Straße 11, 76327 Pfinztal  

 

   Germany 

+49 (721) 961 409 01    

 

 

 

 

 

 

 

[email protected] 

Regulatory Information 

Radio Transmitter (FCC Part 15) 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two 
conditions: (1) This device may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that may cause undesired operation. 

Radio Frequency Interference Requirements - FCC 

This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following measures: 

Reorient or relocate the receiving antenna. Increase the separation between the equipment 
and receiver. Connect the equipment into an outlet on a circuit different from that to which 
the receiver is connected. Consult the dealer or an experienced radio/TV technician for help 

Radio Frequency Interference Requirements - Canada 

CAN ICES-3 (B)/NMB-3(B) 

This device complies with Industry Canada license-exempt RSS standard(s). 
Operation is subject to the following two conditions: 
(1) this device may not cause interference, and 
(2) this device must accept any interference, including interference that 
may cause undesired operation of the device. 

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils 
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) 
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout 
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le 
fonctionnement. 

Statement of Compliance - EU/ETSI 

race result AG hereby declares that this radio equipment is in compliance with Directives, 
2014/53/EU and 2011/65/EU. 

 

Summary of Contents for Chip2Go








Reviews: