![background image](http://html1.mh-extra.com/html/racal-instruments/1260-14c/1260-14c_manual_3123631047.webp)
User Manual 1260-14C
Module Specific Syntax 3-24
Synchronous
Mode Example
The following is an example of an 8-vector synchronous read/write
operation using a 1260-14C at address 1:
1. SE 1.SY,2<CR><LF>
Sets up ports 0 and 1 for
SYNC mode; ports 2-11 will
be in ASYNC mode.
2. SE 1.RD 0,8<CR><LF>
Tells the module to read data
into first eight buffer
locations of port 0 when
clocked.
3. SE 1.WR 1,Y,1,2,3,4<CR><LF> Sets port 1 into the byte
mode and loads write data
into its first four buffer
locations.
4. SE 1.WR 1,5,6,7,8<CR><LF>
Loads write data into the next
four buffer locations of port 1.
5. WR 1.1,0<CR><LF>
Presets the value of port 1 to
zero.
Now the 1260-14C has the write data in the first eight buffer
locations for port 1.
6. SE 1.AR, ON<CR><LF>
Enable SYNC handshake of
READ/WRITE.
Eight handshakes occur using the CLKIN and BUSY lines, each
one causing a READ/WRITE to/from ports 0/1 for the eight
programmed buffer locations. The eighth clock input causes the
1260-14C to disarm and stops all handshaking until the unit is
rearmed.
7. PD 1.0<CR><LF>
Reads the data from the
1260-14C.
Repeat Steps 3-7 to reprogram and run using a new set of WRITE
data, or repeat Steps 5-7 to re-execute the same test.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com