background image

Technical datas

Noise level: increased noise level perceived by tractor driver at standard running speed

Cab closed                                 -  approx. 15 dB (A) 

Rear cab panel open                  -  approx. 70 dB (A)

Equipment:

 Adjustable lower link full floating axle cat. II, III or III N, segmented safety guard, spring-loaded side 

plates, pin-adjustable packer roller (toothed roller and polygon rollers with scrapers,

 

hard-coated in the case of 

toothed rollers), variable-gear transmission with PTO through drive,

 

transmission shaft and friction clutch.

Optional equipment:

 spring-loaded packer-roller support (4 or 6 springs, approx. 29 or 54 kg), clod bar (ap-

prox.

 

26 kg/m), deflector plates (bolted onto side plates, approx. 7 kg), rear segmented safety guard (approx.  20 

kg/m), 4 track eradicators: rigid or spring-mounted, for light-to-medium soil (approx. 90 or 110 kg) / ”Ramat” tines 

for heavy soil (approx. 160 kg), PTO through drive for variable-gear transmission, three-point linkage for mounted 

implements (ca. 67 kg), hydraulic lifting ”Drill-Lift” three-point linkage (approx. 190 kg), lift restrictor for ”Drill-Lift”, 

three-point saddle for attachment for seed drill (approx. 20 kg), bolt-on front frame cat.II (approx. 80 kg), ”Rabid” 

hard-coated knife tines, transmission shaft with auto-cut out clutch, gear-change assembly, lighting gear with warn-

ing labels.

Warning labels 

(pictograms)

The warning labels are used to indicate possible dan-

ger areas; they are designed to ensure the safety of 
all persons involved in the operation of the machine. 

Please refer to the appendix entitled ”Key to picto-

grams” for further details. See Fig. 1 for details of 

their location (”3” etc. = code no., explained in same 

key to pictograms). Replace any missing or damaged 

warning labels.

"Corvus PKE 3000"

Key to illustrations: (13/1) refers to Fig. 13, item 1.

2

7

1
2

3

6

1

- maximum length of the combination (tractor and unit) 12m

- width 2.55m, maximum 3m

- maximum height 4m

- maximum overall weight of the combination 16t, of which 20% is on the 

leading axle

Summary of Contents for Corvus PKE


















Reviews: