RabbitCore eDisplay OP7200, User Manual

Page: 64 / 174

58 eDisplay (OP7200)
4.5 OP7200 Function APIs
4.5.1 Board Initialization
Call this function at the beginning of your program. This function initializes the system I/O ports and
loads all the A/D converter calibration constants from flash memory into SRAM for use by your pro-
gram. This function will turn off LED DS1 (Microprocessor Bad) to indicate that the initialization was
successful.
The ports are initialized according to Table A-3.
void brdInit (void);