RabbitCore eDisplay OP7200, User Manual

Page: 17 / 174

User’s Manual 11
2.2 Demonstration Program on Power-Up
A repeating sequence of graphics and menus will be displayed on the LCD when power is
first applied to the OP7200. Press any of the five keypad buttons immediately below the
LCD to select the corresponding demonstration. When you are in a menu demo screen,
press the diamond-shaped keypad button in the middle row to enter the menu choice that
is highlighted, or press the up and down keys above and below the diamond-shaped key-
pad button to move around the menu.
Note that the programming cable should not be connected for this demonstration.
This demonstration will be replaced by a new program when the programming cable is
attached and the new program is compiled and run. The demonstration is available for
future reference in the Dynamic C
SAMPLES\OP7200
directory as
FUN.C
.