background image

 

2

FOR SAFETY OPERATION 

 

The classification and meanings of the warning signs are as follows: 

 

"DANGER" 

Any mistakes in operation may lead to imminent fear of death or serious injury. 

 

"WARNING" 

Any mistakes in operation may lead to possible fear of death or serious injury. 

 

"ATTENTION"  : 

Any mistakes in operation may lead to light injury or material damages. 

 

The following attention labels are attached to RABBIT FIRE FIGHTING PUMP.    In operation, please be sure to be well 

informed of and to follow the attention. 

 

 

 

 

                                                                                                     L82900900 

For possible dangerous matters and points, never fail to observe the following: 

Type of   

danger 

Rank 

Dangerous points 

Points of attention 

Fire Danger 

Fuel tank 
(In refill of gasoline) 
 
Air cleaner element (in cleaning)

(1)  Never place near fire. 

(2)  After stopping the engine, be sure to confirm the engine is 

cooled down prior to refill gasoline. 

(3) Be careful not to spill gasoline and kerosene for cleaning of air 

cleaner element. 

 Warning 

Muffler (exhaust gas) 
Muffler (dry grass) 
 
Battery (get fire) 

(1) Perform operation at a place 3 m or more off any inflammables. 

(2) Never perform operation on dry grass.    If it is inevitable, remove 

dry grass under the muffler. 

(3) When you take off battery cap, keep good ventilation. 

(4) When you take off battery cap, do not put the battery close to 

flame. 

 Attention 

Fuel tank 
(In refill of gasoline) 
 
Carburetor 
(Overflow) 

(1) Pay full attention to waste cloth which has been used to wipe out 

spilt fuel. 

(2) Be sure to confirm that the fuel tank cap is securely tightened. 

(3) When you supply fuel, keep good ventilation. 

(4) Set the fuel cock lever to "Close", except when you drive. 

(5) Dispose of drained fuel in overflow bottle without keeping it 

intact. 

Burn Attention 

Muffler 
Exhaust pipe 
Exhaust port 
 Battery liquid 

(1) Never touch while it is still hot. 

 

  (2) Be careful, keep your skin away from battery liquid. 

Rotating 
parts 

Attention 

Recoil pulley 

(1) When starting by the rope, be careful that your clothing or gloves 

will not be caught in. 

(2) When starting by the rope, confirm that there is not any person 

or any things within the radius of 2 m. 

Toxicity Warning 

Muffler (exhaust gas) 

(1) Never operate where ventilation is not enough. (Pump house, 

inside of a tunnel, etc) 

Summary of Contents for P455SM

























Reviews: