background image

 

1

 
 

PREFACE

 

We wish to express our great thanks for your purchase of RABBIT PORTABLE FIRE FIGHTING PUMP. 

For safety operation of RABBIT PORTABLE FIRE FIGHTING PUMP, pay attention to: 

 

 The operation of this pump is limited to fire fighting. 

☆ 

Reference : In Japan, the use of this pump is authorized only to the qualified persons who have 
received a special training for safety operation, selected from the official fire fighting staff, voluntary 
disasters-preventing personnel, voluntary fire fighting personnel and qualified maintenance personnel 
for portable fire fighting pump.

 

 

For inspection and maintenance of the pump, please contact the maintenance shops or special dealers 
who have been qualified for maintenance of the portable fire fighting pumps. 
This instruction manual is intended to offer the information necessary for safe and effective operation of 
RABBIT PORTABLE FIRE FIGHTING PUMP.    It is recommended to thoroughly read this manual for the 
best and safest use of RABBIT PORTABLE FIRE FIGHTING PUMP. 
For any matters remaining unclear on your side, please contact our authorized agents. 

 

 

CONTENTS

 

FOR SAFETY OPERATION............................................................................................................................ 2 

CONVERSION TABLE OF UNITS .................................................................................................................. 3 

SPECIFICATIONS .......................................................................................................................................... 4 

DESIGNATION OF PARTS ............................................................................................................................. 8 

BEFORE OPERATION ................................................................................................................................... 8 

PREPARATIONS FOR OPERATION .............................................................................................................. 9 

OPERATION ................................................................................................................................................. 10 

STORAGE .................................................................................................................................................... 12 

MAINTENANCE ............................................................................................................................................ 13 

RABBIT MONITOR ....................................................................................................................................... 15 

CAUTIONS IN COLD WEATHER ................................................................................................................. 17 

TROUBLE-SHOOTING................................................................................................................................. 18 

WIRING DIAGRAM ....................................................................................................................................... 20 

 

 

 

Summary of Contents for P455SM

























Reviews: