Rabbit BL2600, User Manual

Page: 20 / 116

14 SBC BL2600
2.5 PONG.C
You are now ready to test your set-up by running a sample program.
Find the file
PONG.C
, which is in the Dynamic C
SAMPLES
folder. To run the program,
open it with the File menu (if it is not still open), compile it using the Compile menu, and
then run it by selecting
Run
in the
Run
menu. The
STDIO
window will open and will dis-
play a small square bouncing around in a box.
This program shows that the CPU is working. The sample program described in
Section 5.2.3, “Run the PINGME.C Demo,” tests the TCP/IP portion of the board.
2.6 Where Do I Go From Here?
NOTE: If you purchased your BL2600 through a distributor or Rabbit partner, contact
the distributor or partner first for technical support.
If there are any problems at this point:
•
Use the Dynamic C Help menu to get further assistance with Dynamic C.
•
Check the Rabbit Technical Bulletin Board and forums at www.rabbit.com/support/bb/
and at www.rabbit.com/forums/ .
•
Use the Technical Support
e-mail form at www.rabbit.com/support/questionSubmit.shtml
.
If the sample program ran fine, you are now ready to go on to explore other BL2600 fea-
tures and develop your own applications.
Chapter 3, “Subsystems,” provides a description of the BL2600’s features, Chapter 4,
“Software,” describes the Dynamic C software libraries and introduces some sample pro-
grams, and Chapter 5, “Using the TCP/IP Features,” explains the TCP/IP features.