![background image](http://html1.mh-extra.com/html/rabbit/bl2600/bl2600_user-manual_3117400092.webp)
86
SBC BL2600
The PD0, PD1, PE0, and PE2 signals are configured on the RabbitCore module, and not on
the BL2600. These parallel-port bits are configured for Ethernet on RabbitCore modules
with Ethernet and for output low on RabbitCore modules without Ethernet. The signals are
not available on the BL2600 for customer use in applications.
PD0–PD1
Output/ENET
Not connected or Ethernet
See Note
PD2–PD3
Output
Not connected
Low
PD4
Output
Load D/A converter data
Low
PD5
Output
RS-485/RS-232 select
Low
PD6–PD7
Output
Not connected
Low
PE0
Output/ENET
Not connected or Ethernet
See Note
PE1
Output
/CS strobe (digital I/O enable)
Inactive high
PE2
Output/ENET
Not connected or Ethernet
See Note
PE3
Output
RS-485 transmit control
Low
PE4–PE5
Input
IN00-IN01
Pulled up
PE6–PE7
Output
Not connected
Low
PF0
Output
Serial CLKD
Low
PF1
Input
A/D converter busy
Pulled up
PF2–PF7
Input
IN02–IN07
Pulled up
PG0
Output
EEPROM CLK
—
PG1
Output
EEPROM data
Pulled up
PG2
Output
TXF RS-232
Serial Port F
Inactive high
PG3
Input
RXF RS-232
Pulled up
PG4
Output
/CS (digital output enable)
Low
PG5
Output
Not connected
Low
PG6
Output
TXE RS-232
Serial Port E
Inactive high
PG7
Input
RXE RS-232
Pulled up
Table A-3. Use of Rabbit 3000 Parallel Ports (continued)
Port
I/O
Signal
Initial State
Summary of Contents for BL2600
