User’s Manual
11
2. When all other connections have been made, you can connect power to the BL2600.
First, prepare the AC adapter for the country where it will be used by selecting the plug.
The BL2600 Tool Kit presently includes Canada/Japan/U.S., Australia/N.Z., U.K., and
European style plugs. Snap in the top of the plug assembly into the slot at the top of the
AC adapter as shown in Figure 4, then press down on the spring-loaded clip below the
plug assembly to allow the plug assembly to click into place.
Connect the AC apapter to header J12 on the BL2600 as shown in Figure 4. You can
use the crimps and the friction-lock connector included in the Tool Kit to connect the
leads from the power supply, then match the friction lock tab on the friction-lock con-
nector to the back of header J12 on the BL2600 as shown. The friction-lock connector
will only fit one way.
Figure 4. Power Supply Connections
3. Apply power.
Plug in the AC adapter. The power LED will light up when the BL2600 is powered up
correctly.
CAUTION:
Unplug the AC adapter while you make or otherwise work with the connections
to the headers. This will protect your BL2600 from inadvertent shorts or power spikes.
2.2.1 Hardware Reset
A hardware reset is done by unplugging the ACV adapter, then plugging it back in, or by
pressing the
RESET
button located just above the RabbitCore module.
Summary of Contents for BL2600
