22
Rabbit Air -
23
Replacing the Filters
Always power off the unit before cleaning/replacing the filters.
Depending on your indoor environment, the lifespan of the filters may
vary. The filter light will illuminate red for cleaning/maintenance while
a blinking red light means that it is time to change filters. Plug the unit
back in to reset the filter indicator.
Filters
Pre-Filter
Medium
Charcoal-Based Activated Carbon
BioGS HEPA
Customized
Filter Life*
Washable
Every 12 months
Every 12 Months
Every 12 Months
Every 12 Months
Cleaning
Every 3 months
Not Required
Not Required
Not Required
Not Required
*based on 24/7 operation
Filter Maintenance Schedule
Discarding
Used Filters
1.
Grab the handles at the center of the
top and bottom of the Filter Case.
2.
Push together and pull the entire case
out of the air purifier.
3.
Once you have removed the Filter Case,
lay it on a flat surface.
4.
Remove the Pre-Filter by pinching the
two tabs on the top left and right side
of the frame.
Do NOT discard the Pre-Filter. It is
designed to be cleaned and reused.
5.
Discard the remaining filters inside.
Filters should fall out easily by flipping
over the Filter Case.
6.
Set aside your Filter Case and Pre-Filter.
