12
Rabbit Air -
13
User Interface /
Operation Modes
Wireless
Connection
Tap and Hold:
Initiates wireless pairing to connect air
purifier to a 2.4 GHz wireless network or
Bluetooth using a mobile device.
Download Rabbit Air App from the App Store
(iOS) or Google Play Store (Android) on your
mobile device and follow instructions for
setup.
Wireless Indicators
3 LED
= Connected to a 2.4 Ghz WiFi network
and a bluetooth device
2 LED
= Connected to a 2.4 GHz WiFi network
1 LED
= Connected to a device by Bluetooth
For questions regarding wireless setup,
please visit our website www.rabbitair.com/
wireless.
Filter
Indicator
Filter icon and indicators will provide filter
status.
Power
Status
Tap on the power icon to turn
on the MinusA3.
Tap and hold to power off
the unit.
Air Quality
Indicator
Monitor the air quality levels
using particle and odor
sensors. These lights indi-
cate the level of air pollution
detected
High level of air pollution
Low level of air pollution
Connection Status
Connected to WiFi and Bluetooth
Connected to WiFi
Connected to Bluetooth
Solid Red Light
Indicates when you should clean
your Pre-Filter. Tap the filter icon
while the Front Panel is removed to
reset the reminder
(for another 3 months).
Flashing Red Light
Indicates when you should replace
your filters or if filter is not recog
-
nized. See p. 22 to learn more about
filter replacement.
Filter Life
Shows you the remaining life of
your Filter Kit. Each dot represents
approximately 3 months.
New to 10 months
9 to 7 months
6 to 4 months
Replace within 3 months
4 LED = High level of air pollution
3 LED
2 LED
1 LED
=
Low level of air pollution
