INSTRUCTIONS
SHARK
®
INSTALLATION
RAB Lighting is committed to creating high-quality, affordable, well-designed and energy-efficient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
Surface Mounting Bracket
V-Hook
(2)
Housing
JBSHARK-G2 Bracket
Apply Silicone to
Conduit Holes
Housing
Lens Groove
TPKSHARK-G2 Brackets
(2)
Screw
NSF COMPLIANCE
To comply with NSF, apply silicone to the “X” drive on all plugs and
any unused bracket mounting holes as shown in Fig. 3. Use food
grade silicone such as Dow Corning 732.
V-HOOK MOUNTING
(V-Hook for Chain Mounting included)
1. Secure
Surface Mounting Brackets
(2)
to
Housing
as shown in
Fig. 4.
WARNING: Surface Mounting Brackets must be mounted
to Housing.
2.
2. Loop
Loop
V-Hook
V-Hook
(2 included)
(2 included)
on
on
Surface Mounting Bracket
Surface Mounting Bracket
(2)
(2)
as shown in Fig. 4.
as shown in Fig. 4.
3.
3. To suspend
To suspend
Housing
Housing
, connect each
, connect each
V-Hook
V-Hook
to two
to two
(2)
(2)
equal lengths
equal lengths
of chain
of chain
(not supplied)
(not supplied)
and/or appropriate hardware
and/or appropriate hardware
(by others)
(by others)
suitable for mounting surface. Chains must be suitable to support
suitable for mounting surface. Chains must be suitable to support
four
four
(4)
(4)
times the weight of the fixture.
times the weight of the fixture.
TAMPERPROOF MOUNTING
Tamper Proof Bracket Accessory
(TPKSHARK-G2 ordered separately)
1. Use appropriate mounting hardware (not supplied) to secure
the
TPKSHARK-G2 Bracket
(2)
to
Mounting Surface
.
2. Recommended
TPKSHARK-G2 Bracket
distance center to
center is 12 7/8” for SHARK 2ft and 36 13/16” for SHARK 4ft.
3.
3. Push
Push
Housing
Housing
into
into
TPKSHARK-G2 Bracket
TPKSHARK-G2 Bracket
(2)
(2)
as shown in
as shown in
Fig. 5.
Fig. 5. and fasten onto
Lens Groove
.
4. Secure
Housing
onto
TPKSHARK-G2 Bracket
with provided
Screws
(2 per Bracket)
using star head T25 Drive as shown
in Fig. 5.
JUNCTION BOX MOUNTING
Junction Box Bracket Accessory Fig. 6
(JBSHARK-G2 ordered separately)
1. Use appropriate mounting hardware
(not supplied)
to secure
the
JBSHARK-G2 Bracket
to
Mounting Surface
or
Junction Box
(supplied by others)
. Check that the
Gasket
is fully seated. Use Cord
Grip provided to feed supply wires into fixture.
2. Recommended
JBSHARK-G2 Bracket
distance center to center
is 6 3/4” for SHARK 2ft and SHARK 4ft.
3.
3. Use appropriate UL approved wire connectors as required by
Use appropriate UL approved wire connectors as required by
code to complete wiring with supply wires. Be careful not to
code to complete wiring with supply wires. Be careful not to
pinch the wires.
pinch the wires.
4. Push
Housing
into
JBSHARK-G2 Bracket
to secure fixture to
Mounting Surface
as shown in Fig. 7.
Fig: 3
Fig: 4
Fig: 5
Fig: 6
Housing
JBSHARK-G2
Junction Box
Mounting Surface
Fig: 7
Housing
Gasket
Mounting Surface