LFLED8 INSTALLATION INSTRUCTIONS
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We’d like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: [email protected]
Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation
operation or maintenance.
CLEANING & MAINTENANCE
CAUTION: Be sure fixture temperature is cool enough to
touch. Do not clean or maintain while fixture is
energized.
1. Clean glass lens & fixture with non-abrasive glass
cleaning solution.
2. Do not open fixture to clean the LED. Do not touch the
LED.
Easy Installation & Product Help
Tech Help Line
Call our experts 888 RAB-1000
©2014 RAB LIGHTING Inc.
Northvale, New Jersey 07647 USA
rabweb.com
Visit our website for product info
Answered promptly [email protected]
TROUBLESHOOTING
1. Check that the line voltage at fixture is correct. Refer to
wiring directions.
2. Is the fixture grounded properly?
3. Keep leaves and debris out of hood.
LFLED8-IN-0814
WIRING
Universal voltage driver permits operation at 120V thru 240V,
50 or 60 Hz.
1. Connect the black fixture lead to the (+) LINE supply lead.
2. Connect the white fixture lead to the (-) COMMON supply
lead.
3. Connect the GROUND wire from fixture to supply ground.
Patent -
US:
pat. 676,190;
CN:
ZL201230408896.9;
CA:
D RAB Lighting, Inc
MX:
39011;
TW:
pat. pending
ACCESSORIES
Reflector door lens kit can be ordered separately
LNSLFLED8
15
°
spot reflector, door, lens kit for LFLED8
LSLFLED8
20
°
spot reflector, door, lens kit for LFLED8
