Option Menu Item #2: Button Lock - <three rapid flashes>
The Button Lock feature allows you to lock the button on your flashlight to
prevent it from accidentally turning on. When the Button Lock feature is enabled
and your flashlight is turned off, a triple-click will toggle the button lock – i.e.,
unlocking the button if it is locked or locking the button if it is unlocked. Button
Lock is disabled by default.
Your flashlight will turn off when you lock the button and will turn on when you
unlock the button. When the button is locked and you press on the button, your
flashlight will blink 3 times to indicate the button is locked and then turn off.
Option Menu Item #3: Automatic Turn Off - <bright-to-dim>
The Automatic Turn Off feature allows your flashlight to turn itself off after 10
minutes of inactivity. This can be handy if you carry your flashlight in your pocket
and it gets accidentally turned on or if you fall asleep with your flashlight turned
on. Automatic Turn Off is disabled by default.
Your flashlight will turn off gradually, dimming one brightness level each second.
When the minimum brightness level has been reached, your flashlight will blink
slowly 10 times and then turn off. You can click the button at any time during the
sequence to return your flashlight to the original brightness level and to reset the
Automatic Turn Off timer for another 10 minutes.
Option Menu Item #4: Locator Flash - <dim flash>
The Locator Flash feature allows your flashlight to emit a brief flash of dim light
every three seconds when turned off. The periodic brief flash makes it easier to find
your flashlight in the dark. The Locator Flash is disabled by default.
Option Menu Item #5: Momentary - <long-short flash>
The Momentary feature allows your flashlight to differentiate between a click and a
press-hold-release when your flashlight is turned off. A press-hold-release will act
in a momentary fashion when Momentary is enabled – i.e., turning off your
flashlight when the button is released. A press-hold-release acts like a click when
Momentary is disabled. Momentary is disabled by default.
Option Menu Item #6: Customization - <dim-to-bright>
The Customization feature allows you to control access to the brightness menu and
Option Menu controls. This menu item can only be used to disable
Customization. See Enabling Customization, above, to enable Customization.
Customization is disabled by default.
