R.V.R. Elettronica TX20000U-KLC, User'S & Technical Manual

Page: 197 / 248

ELETTRONICA
TX20000U-KLC
User & Technical Manual
Rev. 2.0 14/05/2015
191
JP22/2 I/O TX/RX - Bus RS 485
JP22/3 / LINE TRM Line termination for bus RS 485
JP22/4 / LINE TRM Line termination for bus RS 485
JP48/1 / GND Ground
JP48/2 / GND Ground
JP48/3 Out FWD PWR Forward power. Analogical output, 3.9V for 5000W
JP48/4 Out RFL PWR Reflect power. Analogical output, 3.9V for 1200W
JP48/5 Out OUT AIR
TEMP
Temperature of the air at the output of the chimney. Analo-
gical output, 0V for -50°C, 3.9V for 100°C
JP48/6 Out / Not used
JP48/7 Out EFF. General efficiency. Analogical output, 3.9V for 100%, 0V for
0%.
JP48/8 Out OUT DAC 6 Reserved for future applications.
JP12/1 Out CMN MUTE 1 Common contact MUTE 1 (see JP12/2).
JP12/2 Out MUTE 1 MUTE excitater 1. Digital output, active when exciter 1 is
inhibited by the control unit. Like all the digital outputs on the
parallele interface, it can be configurated through jumper as
normally open or normally closed. This output has a com-
mon contact dedicated to this function (JP12/1).
JP12/3 Out CMN MUTE 2 Common contact MUTE 2 (see JP12/4).
JP12/4 Out MUTE 2 MUTE exciter 2. Digital output, active when exciter 2 is inhi-
bited by the control unit. This output has a common contact
dedicated to this function (JP12/3).
JP12/5 Out CMN LOCAL Common contact LOCAL (see JP12/6).
JP12/6 Out LOCAL LOCAL/REMOTE status. Digital output, active when the
TX20000U-KLC is setted in local modality. This output has
a common contact dedicated to this function (JP12/5).
JP12/7 Out CMN MAINS Common contact MAINS (see JP12/8).
JP12/8 Out MAINS MAINS alarm, active when are present problems on the ali-
mentation
JP47/1 Out AUDIO
ALARM
“AUDIO” alarm (see JP4/8 and JP4/9). This output is active
when the on air exciter is in audio alarm status. This output
has a common contact dedicated to this function (JP47/2).
JP47/2 Out CMN AUDIO
ALARM
Common contact AUDIO ALARM (see JP47/1).
JP47/3 Out CMN RL3 Common contact shared from the outputs JP38/1-10.
JP47/4 Out CMN RL3 Parallel contact with JP47/3.
JP35/1 Out RESRV. 1 Reserve 1. Digitale output, active when the INPUT RESER-
VE 1 input (JP8/2) is active. The common contact of this
output is RL4 (JP35/5)
JP35/2 Out ON PROTF Pulse output, every minute is activated when the ProtF is
ON. The common contact of this output is RL4 (JP35 / 5)
JP35/3 Out OFF PROTF Pulse output, every minute is activated when the ProtF is
OFF. The common contact of this output is RL4 (JP35 / 5)