R.V.R. Elettronica TX20000U-KLC, User'S & Technical Manual

Page: 24 / 248

ELETTRONICA
TX20000U-KLC
User & Technical Manual
Rev. 2.0 14/05/2015
18
5.1.7 Alarms menù
This screen describes all the registered events which are relevant to determine the pro-
bable causes of any dysfunction. The screen is composed of a variable number of pages
(up to 10) in function of the number of events occurred (Figure 5-9). The last events in
chronological order are shown in the first page and so on. To shift to the different pages,
use the arrow buttons
It is not possible to cancel the alarms visualized in this menu if not
by personal RVR
Menu Column Description
Unit Module of the system which generated the failure
Err Type of failure and description.
For more information see chapter 5.4
Time Time (hrs and minutes) at which the failure occured
Date Date at which the failure occured
Figure 5-9
5.1.8 Service menù
This menu is normally used during the maintenance operations. When this screen is
visualized, the Control Unit checks the status of the modules of the unit more frequently
in order to have a visualization of the different parameters as fast as possible. When this
menu is entered, all the secondary functions are interrupted, therefore a possible alarm
may not be visualized and registered immediately; when exiting this menu all the alarms
which were temporarily put in “stand-by” are registered. If the user sets some modules in
OFF modality, these will be automatically reactivated when exiting the menu. This menu
is deactivated after 60 minutes if no key is selected. (Figure 5-10).
Menu Line Description
Fwd Forward power globally emitted by the amplifier
Unb Unbalancing power dissipated in the dummy load connected to the
combiner
RF Unit1 - On Fields used to switch ON and OFF the amplifier modules.
Fwd Forward power generated by the RF module
Rfl Reflect power from the RF module