TEX1000-LCD
4 / 38
User Manual
Rev. 1.1 - 23/06/05
The exciter's management software is based on a menu system. The user can
navigate between the various submenus by using four push buttons: ESC, LEFT/UP,
RIGHT/DOWN and ENTER.
On rear panel there are Mains connectors, with a voltage selector that allow to use
different mains voltage (Full Range version), audio input and RF output connectors,
telemetry connector, protection fuses, two inputs for modulated signals on subcarriers
from special external encoders normally used in Europe for RDS (Radio Data System)
transmission.
/TLM Option
(Designed for the alarm signalling in absence of power supply)
The
TEX1000-LCD/TLM
allows to sent alarm messages, via SMS, to the user’s
cell-phone or to a group of users.
It is able to signal the Mains Alarm (in absence of power supply), also after long times
of black-out.
