TEX1000-LCD
37 / 38
User Manual
Rev. 1.1 - 23/06/05
11. System Status Enquiries
11.1 Local enquiries
The
TEX1000-LCD
device indicate their status locally and concisely by means of
the indicator lights on the front panel. More detailed information can be obtained
from the setting and configuration menus.
11.2 Remote enquiries with remote control software (Opt.)
A PC with the “TELECON” telemetry and remote control software can be used to
obtain a very detailed view of all system operating parameters and of all the settings
both of the equipment and the devices connected to said equipment.
11.3 Remote enquiries with GSM modem + SMS
Any GSM mobile telephone can be used to query the devices with this system. The
device will respond as outlined in the tables in the sections below.
Before querying the system by means of SMS messages, you must be connected by
means of the "TELECON" program and set the number of the selected phone Service
Center as well as the telephone numbers that can send this type of command to the
devices (for the necessary operations see the chapter 10).
11.3.1 List of the commands that can be sent via SMS
•
Commands that can be sent to
TEX1000-LCD
:
INFO
Sent of the information on the system operation state
TXON
Switch On
TEX1000-LCD
“OnAir”
TXOFF
Switch off
TEX1000-LCD
“OnAir”
ALARM
Sent of the information on the present alarms in the
TEX1000-LCD
list (the command supllies the list of the last 6 alarms available in
memory).
RESET
Reset of all the alarms stored
