18
/ 40
User Manual
Rev. 2.0 - 29/11/22
SCM6/1
ELETTRONICA
If the user pushes the “Nominal” button, the management software first asks for
confirmation on the status bar. Upon confirmation, the SCM6/1 checks whether the
actual status of the transmission system coincides with the one stored in memory
as “nominal”, and then it performs the necessary steps to go back to the nominal
status, that is:
• it performs the necessary permutations to bring all the transmitter back in the
normal position (i.e. Position 1)
• it sets the priority level of the transmitters as in the nominal configuration
• it restores the Enab./Disab. setting of each transmitter as it was in the nominal
configuration
When all the steps are completed and confirmed by the relevant TSs, the “nominal”
LED will be lit indicating that the system is configured as required.
Summary of Contents for SCM6/1
Page 1: ...SCM6 1 SCM6 1 USER MANUAL VOLUME1 Manufactured by R V R ELETTRONICA Italy ...
Page 4: ...ii User Manual Rev 2 0 28 10 22 SCM6 1 ELETTRONICA ...
Page 6: ...iv User Manual Rev 2 0 28 10 22 SCM6 1 ELETTRONICA This page was intentionally left blank ...
Page 46: ...40 40 User Manual Rev 2 0 29 11 22 SCM6 1 ELETTRONICA This page was intentionally left blank ...
