SCM6/1
ELETTRONICA
15
/ 40
User Manual
Rev. 2.0 - 29/11/22
5.3.5 Ack. menu
The “Acknowledge” menu is useful for diagnostics pourpose, since it gives the
status of the transmitters as they are seen by the SCM6/1.
ON
A “X” in this column indicates the presence of the ON signal, a
“-” indicates its aInterlockence
HT
A “X” in this column indicates the presence of the HT signal, a
“-” indicates its aInterlockence
RF
A “X” in this column indicates the presence of the RF signal, a
“-” indicates its aInterlockence
SWC
“A” means Mode 1 (Antenna), “L” means Mode 2 (Load)
MTX
A “X” in this column indicates the presence of the MTX signal,
a “-” indicates its aInterlockence
InH
A “X” in this column indicates the presence of the InH
signal, a “-” indicates its aInterlockence
For the reserve transmitter line “TXR”, the five fields have a different meaning:
1
MA
On
2
AR
Off
3
DE
Fault
4
LOC
Local
5
--3---
(example) The reserve transmitter is set to suInterlocktitute the
transmitter 3
5.3.6 Alarm menu
This menu contains the history of the alarms that possibly occurred.
With the first line of the menu the user can select one of the alarm that occurred
(the inverted “01” in the example above) out of the set of alarms that are kept in
the memory (the number “07” in the example).
The rest of the screen gives the date and time of the alarm, the kind of alarm and
the status of the acknowledges of the transmitter (see 3.3.5) at the moment the
alarm was generated.
Summary of Contents for SCM6/1
Page 1: ...SCM6 1 SCM6 1 USER MANUAL VOLUME1 Manufactured by R V R ELETTRONICA Italy ...
Page 4: ...ii User Manual Rev 2 0 28 10 22 SCM6 1 ELETTRONICA ...
Page 6: ...iv User Manual Rev 2 0 28 10 22 SCM6 1 ELETTRONICA This page was intentionally left blank ...
Page 46: ...40 40 User Manual Rev 2 0 29 11 22 SCM6 1 ELETTRONICA This page was intentionally left blank ...
