8
/
34
User Manual
Rev. 1.0 - 01/02/22
/RDS-TFT2HE, /RDS-TFT3HE & /RDS-TFT4HE
ELETTRONICA
RDS
(RDS signal) always present in the back of the machine itself. If the
connecting device is different, identify an equivalent.
To
I
2
C BUS
or
SERVICE/RDS
To
19KHz PILOT OUT
To
SCA1/RDS
CUSTOM CABLE
Note :
For programming you need to connect it directly to a PC by using an RS232
cable or an USB-RS232 converter. This is a pre-requisite to ensure the proper
operation of the equipment. Disconnect the DB9 connector from the
I
2
C BUS
or
SERVICE/RDS
input and then connect it to your PC.
After programming, disconnect the RS232 data cable and then reconnect the
custom cable to the
I
2
C BUS
or
SERVICE/RDS
input
