PTX-LCD
48 / 58
User Manual
Rev. 2.3 - 18/07/07
11.2.1 Adjustments, settings and indicators
D2
lit: no audio
D4
lit: supply voltage OK
D5
lit: supply voltage OK
D6
lit: supply voltage OK
JP8
factory setting, please dont change
11.3 Audio input
The audio input section is on the rear part of the exciter and is directly connected
to the audio motherboard using a strip-line connector. It is composed of two boards
coupled in a L shape and fastened to the part of the rear panel that hosts the
audio connectors.
The first board (Fig. 11-5) contains the trimmers to adjust the levels and the filters
for each input channel. The second board (Fig. 11-6) contains the level regulations
and the switches for the software-based audio configuration.
Figure 11-5
After the necessary processing (filtering, level regulation, selection), the audio
input section passes the signals to the audio motherboard that route them to the
coder card.
Summary of Contents for PTX-LCD
