R.V.R. Elettronica PTX-LCD, User Manual

Page: 32 / 62

PTX-LCD
28 / 58 User Manual Rev. 2.3 - 18/07/07
If you push the encoder while the cursor is on the name of a submenu, and if this one
contains modifiable parameters, the cursors enters in the central part of the window,
permitting to edit thos modifiable parameters.
Each of the menus of this kind contains an “EXIT” item: pushing the encoder while
the cursor is on “EXIT” will put you back in navigation mode.
7.2.2.1 Main
Figure 7-15
RF
Activation (On) / deactivation of RF power output
FPwr
Reading and setting of the output power. The power reading is expressed
in Watts, the setting value in % of the maximum power. If one pushes the
encoder when the cursor is on this item, the measuring unit changes from
“W” to “%”, and turning the encoder he will be able to set the desired
value. Pushing the encoder again will store the new setting.
RFPwr
Reflected power reading in Watts
Freq
Working frequency. Pushing the encoder when the cursor is on this item
will give the possibility to change the working frequency turning the encoder.
Please note that when the encoder will be pushed to store the new
frequency, the software will ask for its confirmation(“ Are you sure? ”).
If you select “ Yes ” and push the encoder, the new frequency will be set,
wile pushing the encoder on “ No ” it will be aborted.
VCO
Control voltage applied to VCO in Volt