PTX-LCD
24 / 58
User Manual
Rev. 2.3 - 18/07/07
7.2.1 Default menu
Figure 7-7
To work on a menu item, turn the encoder to select it and then push the encoder.
Depending on the item, it could be possible that a new window is opened or that it
will be possible to directly modify the parameter.
Activation (
On
) / deactivation (
Off
) of RF output power.
Otput power reading and setting. The power reading is expressed in Watt,
while the setting is expressed as percentage of the maximum output power.
Pushing the encoder when the cursor is on this item will put you through the
menu that permits to modify the power setting.
Figure 7-8
Reflected power reading in watt
Reading and setting of the working frequency. Pushing the encoder while the
cursor is on this item, will put you through the menu that permits to modify the
frequency setting.
Figura 7-9
After choosing a new frequency value, the management software will ask you
to confirm it (
Are you shure? Yes/No
). After confirmation pushing the
encoder on the choice
Yes
, the exciter unlocks from the current frequency (the
unlock LED is lit) and then locks again on the new frequency.
Summary of Contents for PTX-LCD
