![background image](http://html1.mh-extra.com/html/r-v-r-elettronica/pj3500m-c/pj3500m-c_user-manual_3098314024.webp)
1
/ 34
User Manual
Rev. 1.0 - 05/04/13
PJ3500M-C & PJ5000U-K
Connect the RF output to the antenna cable or to a dummy load capable of
dissipating the power generated by the amplifier.
An ILME model CXF4/2 multipole socket is supplied with the amplifier to power the
machine. The socket must be connected to the multipole cable that will be wired
to the mains switchboard.
Danger:
to avoid any risk of shock make ABSOLUTELY sure that the power
supply cable is NOT powered when the multipole socket is connected to the cable
itself.
Connect the multipole socket to the power supply cable as described below and
refer to figure 5-2:
Three-phase power supply:
•
G
Ground
• 1
Neutral
• 2
R Phase
• 3
S Phase
• 4
T Phase
• 11,12 Not connected
G
4
3
11
1
2
12
Figure 5-2:
View of the mains multipole socket - terminals side (internal)
Single-phase power supply:
•
G
Ground
• 1
Neutral
• 2
Phase
• 3
Not connected
• 4
Not connected
• 11,12 Not connected
Danger:
avoid the
risk of damaging the machine
by grounding it correctly. As
such, connect the ground conductor of the power supply cable to the specific