28
/ 34
User Manual
Rev. 1.0 - 05/04/13
PJ3500M-C & PJ5000U-K
• PIN4 of the main connector is internally connected to PIN3 by Ø 6mm wire.
• PIN5 is directly wired to ground.
7.1.2 Three-Phase Wiring
For the three-phase, the configuration of the external power supply plug must
have the following characteristics:
• PIN1 of the main connector is connected to Neutral wire.
• PIN2 of the main connector is connected to Phase R Wire.
• PIN3 of the main connector is connected to Phase S Wire.
• PIN4 of the main connector is connected to Phase T Wire.
• PIN5 is directly wired to ground.
7.1.3 Voltage Change
WARNING:
the single-phase power supply may be used only with 230 Volts.
Proceed as follows to change voltage inside the machine: