R-Tech TIG200PDC, Operation Instructions Manual

Page: 13 / 21

This condition can be maintained as long as required.
Release the tig torch switch to go to step 2
The machine will now increase output to base (main) current in time set by slope-up.
Press and hold the tig torch switch when main weld is complete
The machine will now decrease the welding output current to finish (min) in down-slope time set. Once at finish (
min) output you can release the Tig torch switch to end weld the gas post-flow will continue to run for set time.
9 LED Display 3 digit LED meter is used to display the actual amperage (when welding).
10 Base current control, This adjusts the Base welding current,when you use at pulse function,please put
it lower than main(pulse current at pulse function).
11 Pulse width adjustment, this set show the rate of pulse current/base current,when you use the pulse
function.
Operating machine
SAFETY PRECAUTIONS
WARNING!
ELECTRIC SHOCK CAN KILL
Do not touch electrically live parts or electrode with skin or wet clothing. Insulate yourself from work
and ground Always wear dry insulating gloves
WARNING!
FUMES AND GASES can be dangerous
Keep your head out of fumes & gases produced from welding.
Use ventilation or exhaust to remove fumes & gases from breathing zone and general area.
13