R-Tech TIG200PDC, Operation Instructions Manual

Page: 4 / 21

Introduction
The R-Tech TIG200PDC is a member of our field acclaimed family of welding products.
Premium features include:-
1 Inverter power source - more efficient to operate, provides smoother weld characteristics.
2 Pulse welding in DC Tig welding mode
3 HF Arc start - Easy arc striking and prolonged tungsten life
4 Slope up / slope down
5 Digital amp meter
℃
6 Industrial 60% Duty cycle at 200 Amps @ 40
Recommended Processes
The R-Tech TIG200PDC is recommended for the Tig welding processes within its output capacity of 200 Amps
Equipment Limitations
The R-Tech TIG200PDC is protected from overloads beyond the output ratings and duty cycle as per machine
specifications with thermostat protection of the output coils and rectifiers.
Welding Capability - Duty Cycle
The R-Tech TIG200PDC is rated at 200 Amps at 60% duty cycle on a ten minute basis. If the duty cycle is
exceeded a thermal protector will shut machine off until the machine cools.
Technical Specifications
Model No. R-Tech TIG200PDC
Input 240V AC 50/60Hz Fuse Slow-blow 32Amp
MMA
No-load Voltage 60V - 80V
Current Range 5A - 160A
Rated Output Current 160A
Duty Cycle 60%
DC TIG
No-load Voltage 60V - 80V
Current Range 5A - 200A
Rated Output Current 200A
Duty Cycle 60%
Up-Slope Time 0-5 Seconds
Down-Slope Time 0-5 Seconds
Pulse Frequency Range 0.5Hz - 25Hz
Gas Post Flow Time 1 - 10 Seconds
Arc Starting Mode High Frequency
Pulse width 0.1-0.9
Gross Weight 16 KG
Insulation IP21S
Dimensions mm 425 x 195 x 310
4