16
cutting power for job.
Water contamination in torch head, Check for water in water trap at rear of machine, if water is
present, drain air compressor, clean water out of air lines, empty water trap by pressing water
release button on bottom of air regulator water trap. Fit new consumables as per instructions
earlier in this manual
Plasma Torch Consumables parts list
R-Tech Torch Spares
Plasma 30DV
Part No.
Electrode
P30-EL
Cutting Tip
P30-CT
Ceramic Shield Cup
P30-SC
Gas distributor insulator ring
P30-GD
Torch Head –Hand Held
P30-THH
Torch Complete Hand Held 6M
P30-4.5MHHT
