8
Controls and Settings
Front Panel
Fig 1
1)
Voltage /MMA Arc-force/TIG down slope Display
The meter on the front panel indicates the actual welding voltage or preset MIG voltage.
Display 1, Volts, Seconds and Percent
2)
Current /Wire speed indicating
The current indicating meter on the front panel indicates the actual welding current during the welding
，
indicates
the wire speed during no welding.
Display 2, Amps & Meters Per Minute
3)
Power On indicator.
This will light up when power to the machine is connected and on/off switch in ON position.
4)
MIG & TIG post flow gas time in seconds
5)
Wire speed - When lit LED display will show wire feed speed in inch/min
6)
Current - When lit LED display will show amperage in MIG / TIG / MMA mode
