5
Technical Specifications
Installation
Model No.
R-Tech MTS255-HF
Input
240V 1 ~ AC 50/60Hz
Operation
Rated Input Current
32AMPS
Rated Output Current
250 AMPS
Duty Cycle 35% @ 40
O
C
250A (MIG/TIG) ,200A(MMA)
Duty Cycle 100% @ 40
O
C
160A (MIG/TIG),130A(MMA)
Output current Range
MIG: 30-250 AMPS
MMA: 10-200AMPS
TIG: 10-250 AMPS
No Load Voltage
60~80V
MIG Voltage Adjustment
Range
14V - 29V± 3V
Suitable Wire Diameter
0.6mm 0.8mm 1.0mm
Insulation
Class F
Read entire section before starting installation
WARNING!
Electric Shock can kill, only qualified personnel should perform this installation. Turn off input power at the fuse box before
working on this equipment. Do not touch electrically live parts. Always connect the machine to an earthed main supply as
per national recommended standards.
Select suitable location
Place the welder where clean cooling air can freely circulate in and out of the front & rear louvre vents. Dirt, dust or any foreign
material that can be drawn through vents into welder must be kept to a minimum. Failure to observe these precautions can
result in excessive operating temperatures which can lead to plant failure.
Grinding
Do not direct grinding particles towards the welder. An abundance of conductive material can cause plant failure.
Stacking
This machine cannot be stacked.
