R.P.S. Corporation 34HD, Operating Instructions Manual

Page: 12 / 26

- 12 - 34-OP-EN
SWEEPING:
1. Turn on machine Power Switch (A) . Switch
in the Middle position will power Main
Brooms only. Switch in the Up position will
power Main Brooms and Side Brooms.
2. Check the Battery Gauge to ensure proper
charge before starting to sweep (B) .
3. Lower the Main Broom to the fl oor by dropping
the Main Broom Lift Lever forward (C) .
4. Lower the Side Brooms head to the fl oor by
dropping the Side Broom Lift Lever forward (D) .
5. Begin sweeping by pulling the Clutch lever
(E) slowly and then to the speed required.
6. To operate the machine in reverse, simply
release the Clutch Lever (E) to its neutral
position and push or pull machine.
7. To stop the machine, move the Clutch Lever
all the way forward to activate the brake (E) .
Always raise the Brooms before stopping to
prevent fl attening of the Broom bristles.
WET SWEEPING:
1. Turn on machine Power Switch (A) . Switch
in the Middle position will power Main
Brooms only. Switch in the Up position will
power Main Brooms and Side Brooms.
2. Check the Battery Gauge to ensure proper
charge before starting to sweep (B) .
3. Lower the Main Broom to the fl oor by dropping
the Main Broom Lift Lever forward (C) .
4. Lower the Side Brooms head to the fl oor by
dropping the Side Broom Lift Lever forward (D) .
5. Open the WET Sweep By-Pass door by rotating
it clockwise (F) . This door being open reduces
the Dust Control. Always remember to close
door when sweeping again once on dry ground.
6. Begin sweeping by pulling the Clutch lever
(E) slowly and then to the speed required.
7. To operate the machine in reverse, simply
release the Clutch Lever (E) to its neutral
position and push or pull machine.
8. To stop the machine, move the Clutch Lever
all the way forward to activate the brake (E) .
Always raise the Brooms before stopping to
prevent fl attening of the Broom bristles.
E
D
C
A
B
F