R.P.S. Corporation 34HD, Operating Instructions Manual

Page: 13 / 26

34-OP-EN - 13 -
CLEANING FILTER:
1. If dust begins to blow through the Vacuum Motor, is
leaking out of the sides, or machine begins to not
sweep well, then the fi lter needs to be cleaned.
2. Before cleaning Filter, turn off Main
Broom and Side Broom motors.
3. Clean the Filter by turning the Beater
Bar Shaker for 20 seconds (B) .
NOTICE
After using the Shaker Switch let the machine sit for 30
seconds to allow the dust time to settle.
CHANGING FILTER:
1. To remove Filter, open Machine Hood by releasing the
Hood Latch (C) .
2. Undo the three Keps Nuts and lift open the Filter
Chamber Lid (D) .
3. Pull out old Filter and replace with new one.
EMPTY HOPPER:
1. After machine usage, stop and shake fi lter.
2. Turn machine OFF .
3. Relase the Hopper Access Latch (E) and remove the
Hopper (F) . Always ensure that Beater Bar is in the
upright position before removing Hopper. Damage can
occur if Hopper removed incorrectly.
4. Clean Hopper thoroughly before sliding back in
machine.
A
B
F
D
E
F