RIDA qLine
®
Orbital Shaker
15
15.11.2015
3.2 Cleaning and decontamination of the device
Wipe external surfaces and controls of the device with a mild soap solution (water and household detergent)
and a lint-free cloth. Just use a small amount of cleaning agent and not wet cloths. Under no circumstances
should the surfaces be cleaned with acids, chlorine containing solvents or saline solutions.
Please don’t scour or scratch, otherwise damage to the lettering and surfaces cannot be avoided. Should
you wish to use cleaners other than those mentioned make sure beforehand that the foreseen method will
not cause any damage.
4 Uninstalling and disposal of the RIDA qLine
®
Orbital Shaker
Correct handling is required due to the device characteristics and the possible area of application. Please
observe the following instructions when using the device:
4.1 De-installation of the device
When uninstalling / disassembling the device and its components it is essential to take the following steps:
1.
First switch off the RIDA qLine
®
Orbital Shaker with the mains switch.
2.
Disconnect the device from the mains
5.
Now you can remove the shaker and its components from the work area.
4.2 Disposal of the device
Damaged or scrapped electric or electronic devices have to be handed in at recycling centres.
The packing material too should be disposed of properly (material separation).
5 Packing and storage of the device
5.1 Packing the device
Caution:
Before packing make sure that the device has been adequately cleaned / decontaminated.
User who unpack the device afterwards and want to start it up should be aware of potential
dangers. The user is responsible for direct or indirect damage both corporal and material, that
may result from the media used as long as they don’t provide adequate signs about the
potential dangers.
When possible use the original material for packing the device. Protect each module against shocks from
outside with bubble wrap. If you pack individual modules in a box ensure adequate spacing between them
and fill the spaces with insulation material. If you don’t use the original packing then mark the pack on the
outside as follows:
-
Glass sign (Caution, fragile)
-
Umbrella (keep dry)
-
Pack content (details about the content)
