Chrysler Pacifica Minivan
R.A.SH Tronics
Department of R&D
6
DESCRIPTION OF MAIN COMPONENTS
DRIVEIN STA-35-xxx DISPLAY
Through this 3.5” resistive touch screen displays you can
control all operation and programming functions for the
DRIVEIN
system.
All secondary functions are also controlled and programmed
Through the display. It’s location in the vehicle will vary,
depending on the system set-up and mounting options for the
driver. Most secondary functions can be remotely operated
from other devices (In motion voice scan, five buttons Round
Touchpad, five ways joystick and do it yourself switches),
depending on the customer needs. Refer to the Drivein
Operation and Programing Manual for further details.
VEHICLE INTERFACE MODULE (VAC-212)
Through this dual CANbus gateway module, which is connected
to the steering module communication network, it is possible
to control almost all of the steering functions like turn signals,
horn, wipers, lights, cruise and many more.
It is also used to collect real time information and update the
LCD display.
CANbus GEAR SELECTOR & ENGINE START/STOP MODULE
This module is used to override the OEM start stop system; it is
designed to be directly attached to the OEM high current
harness using the quick-fit terminals of the OEM harness. No
need to solder just remove the OEM wires from the connector
and plug them as per wiring diagram provided in this manual
for your specific vehicle.
UNIVESAL 12 RELAYS MODULE
Can do many functions:
1.
Motor control
2.
Docking station
3.
EGRESS
4.
Lift’s and hoists
5.
Hazard warning lights
