Chrysler Pacifica Minivan
R.A.SH Tronics
Department of R&D
9
SHIFT BY WIRE CANbus MODULE
This new R.A.SH Electronics powered gear selector uses the CAN-Bus network information to function, it makes it
easy to fit inside any modern vehicle. Since the CAN-Bus information is very reliable, shifting do not rely on
Potentiometer position or the voltage measured out of it
and do not rely on untrained programmer. Check wiring
diagrams below.
The Chrysler Pacifica new concept of powered gear
selector, brings the vehicle safety to a higher level, due to
the fact that the system collects the vehicle speed
combined with the foot brake information, makes it easy
to operate the system by pressing the gear buttons shortly,
not using the Long/ Short press mode, once
Reverse
button is pressed while the vehicle is driving in a high
speed, even if the foot brake is slightly pressed, no
shifting is possible.
Another important feature is that this
vehicle has no gear cable going to the gear box, it is purely
based on CANbus (Picture A/ B), our gear selector module
is a CANbus gateway that is integrated into the Pacifica communication network as any OEM module so the
manufacturer diagnostic tools cannot recognize it and cannot recognize the OEM CANbus wires are cut, Picture C/
D.
Picture A
Picture B
Picture C
Picture D
