QwikCheck™
Sperm Quality Analyzer User Guide Version 1.00 I-Button WHO 5th _06_AUG_2012
7
SECTION 3: Getting Started / Set-Up
NOTE:
The QwikCheck GOLD
is loaded with a
minimal number of I-
Button tests in
memory. However, the
user must load tests
right away to insure
that testing will not be
interrupted. Please
refer to the I-Button
loading section of this
manual for instructions!
Power-On
Plug the system into a grounded electrical source.
Turn the system on by pressing the main switch located on the rear panel. The
Power
indicator will illuminate and the following screen will be displayed.
Auto-Calibration and Self-Test
NOTE:
Do not use any of the
keyboard functions
during stabilization.
Press
ON/OFF
key on the keypad and auto-calibration will begin.
This process takes 5-7 minutes.
When the system stabilization and auto-calibration processes are complete, a
series of tests will be run.
Do not insert a capillary into the device or use any of the keyboard functions
until instructed to do so by the system.
The MAIN menu will appear when the self-test process is complete. The
system is now ready for use.
Set-up System Defaults
Before running a test for the first time, set up the system defaults by going to:
MAIN MENU > SERVICE > SET-UP
QwikCheck GOLD
SPERM QUALITY ANALYZER
VERSION 1.0
PRESS ON/OFF KEY
TO ACTIVATE THE UNIT
PRESS ON/OFF KEY
TO ACTIVATE THE UNIT
QwikCheck GOLD
SPERM QUALITY ANALYZER
PLEASE WAIT
SYSTEM STABILIZATION AND
AUTOCALIBRATION
MAIN MENU
TEST NEW PATIENT
RUN CONTROLS
ADD I-BUTTON TESTS
SERVICE
SERVICE MENU
SERVICE DATA
SET UP
SERVICE PERSONNEL
PRINT SELF-TEST DATA & SETTINGS
